Replacing The Fuse; Replacing The Batteries; Plates And Decals - Pronomic Minimontacargas 65 Instrucciones Originales

5.2.9 Replacing the fuse

The fuse is located inside the power pack. A wiring diagram for the lift trolley is attached to the
inside of the lid of the power pack. Before removing the lid, by loosening the screws, the user
should apply the brakes and wear protective footwear. Be extra cautious when opening the power
pack. If the device is tilted after the lid has been removed, the batteries can slide out of the power
pack and harm the user.
5.2.10

Replacing the batteries

Batteries may be replaced by a person with basic technical knowledge. When changing batteries
protective footwear should be used the brakes should be applied. To open the power pack, see
section Replacing the fuse. Used batteries should be handed in to a recycling centre.
5.2.11

Plates and decals

Verify that the following plates and decals are attached and fully readable.
Plate/decal
CE Decal
Serial number
Model
Maximum load
No feet
Not for lifting people
Safety information
________________________________________________________________________________
Description
Decal with CE mark and year
of manuacture
Decal with serial number
Decal with text stating the
model of the lift trolley
Decal with text stating the
maximum load and that
lifting people is not allowed
Striped decal with an image
to warn against placing feet
on the wheel frame
Decal with image showing
that lifting people is not
allowed
Decal with text informing
about safety and contact
information
8 – Minilift 65 / 85 / 120
Placement
At the back of the cross-
member
At the back of the cross-
member
At the top on both the left and
the right side of the column
Clearly visible on the power
pack
On the wheel frame
(2 pcs)
On the cross-member
(2 pcs)
Clearly visible on the power
pack