Using The Lift Trolley; Handlebar; Remote Control; Power Pack - Pronomic Minimontacargas 65 Instrucciones Originales

3 Using the lift trolley

If the load is left on the lifter for some time it may be necessary to lower the load before it can be
raised.

3.1 Handlebar

To achieve a good working position the handlebar should be adjusted to a correct height. The
handlebar can easily be adjusted in height by loosening the black knobs on the handlebar. To lock
the handlebar at the selected height the knobs are turned clockwise.
Never put arms through the handlebar to reach something on the load carrier, as this may pose a
crush hazard.

3.2 Remote control

The load carrier is raised and lowered by pressing the buttons on the remote control. The remote
control has either two or four buttons and is used as shown below.
The remote control should be placed to allow the user to easily press the buttons. The bracket for
the remote control is fitted to the handlebar. The bracket can easily be moved by turning the black
knob counter-clockwise. The bracket can be locked in any position on the handle by turning the
knob clockwise. The bracket can be tilted to any angle on the handlebar. The remote control can
be removed from the bracket.

3.3 Power pack

Modifying the power pack is dangerous. The device may not be sealed in any way. It should not be
exposed to splashed or running water.

3.4 Brakes

On lift trolleys equipped with central brake the brake is applied by moving the brake bar to its
lowest position.
________________________________________________________________________________
Up/down
4 – Minilift 65 / 85 / 120
Up/down
Slowly up/down