Connections - Denon DCD-201SA Instrucciones De Operación

4

CONNECTIONS

Connecting to the 201SA Series
When connecting to a pre-main amplifier other than the one in the 201SA series, there is no need to make
2
connection 2. Note that in this case none of the system functions (auto power on, etc.) will work.
• System operations such as the auto power on function can only be used if stereo audio cords and system cords are
connected between all the system components. Be sure to securely connect all the connection cords between all the
units.
• Disconnecting a system cord during system operation may result in malfunction. Be sure to unplug the power cords
before changing the connections.
• Install the components in such a way that the ventilation holes of the pre-main amplifier (PMA-201SA) are not
obstructed.
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Power cord
(for U.K. model)
Pre-main amplifier
PMA-201SA
INPUTS PB
CD DVD/AUX AUX-2 TAPE MD
1 2
SYSTEM
L
CONNECTOR
R L
SIGNAL
GND
TUNER PHONO TAPE MD
L
R
R
SPEAKER SYSTEM
REC
SPEAKER IMPEDANCE
4 16
MD-recorder
DMD-201SA
LINE DIGITAL
OUT IN OPTICAL
SYSTEM
CONNECTOR
OUT 1 IN 2
L
1 2
R
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Power cord
(for U.K. model)
All manuals and user guides at all-guides.com
Power plug
AC 230V, 50 Hz
(Plug into a power outlet)
Power cord
(for U.K. model)
CD player
DCD-201SA
LINE OUT DIGITAL
OPTICAL
SYSTEM
CONNECTOR
1 OUT 2
L
1 2
R
Connect the DCD-201SA's LINE OUT jacks to
1
the pre-main amplifier's CD input jacks using the
included stereo audio cord.
Connect the DCD-201SA's SYSTEM
CONNECTOR jack (1 or 2) to the SYSTEM
2
CONNECTOR jack (1 or 2) of one of the other
components using the included system cord.
Connect the DCD-201SA's optical digital output
terminal (DIGITAL OPTICAL OUT 1 or 2) to the
3
digital input terminal (DIGITAL OPTICAL IN 1 or
2) of the MD recorder using optical connection
cords.
4
Plug the power cord into a power outlet.
The DCD-201SA can also be used when connected
to a pre-main amplifier other than the one in the
201SA series. In this case, none of the system
functions (auto power on, etc.) will work.
• Do not place another component directly on top of the
pre-main amplifier (PMA-201SA).
• Do not stack a component that is larger in depth (PMA-
201SA or DCD-201SA) on top of a component that is
smaller in depth (TU/DRR-201SA).
• For stability, do not stack more than three components
on top of each other.
1 3 2
POWER LOADING MECHANISM
MEMO REC /
DMD-201SA ON / STANDBY 5 INPUT CHARACTER EDIT CD SRS MULTI REC
REC LEVEL / ENTER
8 9
+
MINIDISC RECORDER DMD-201SA
1 3 2
C
ON / STANDBY 5 8/6 7/9
DCD-201SA
TRACK
INDEX TIME
M S
COMPACT DISC PLAYER DCD-201SA
ENGLISH
NOTES:
• Do not plug power cords into power outlets until all
connections have been completed.
• Check the left and right channels and be sure to
interconnect them correctly (R to R, L to L).
• Plug in the power cords securely. Incomplete
connections will result in noise.
• Clasping the power cords and connection cords
together may result in humming or noise.
• After unplugging the power cord, wait at least 5
seconds before plugging it back in.
Recommended System Installation
• To ensure performance and stability, install the 201SA
series as shown below.
VOLUME
PMA-201SA
™ ON / STANDBY ¡ OFF MODE SOURCE DIRECT
PHONES FUNCTION
INTEGRATED AMPLIFIER PMA-201SA
PRESET / TUNING
DOWN UP
ON / STANDBY TIMER BAND / RDS MEMORY / SET TU-201SA
MHz CH
TUNED STEREO AUTO
AM-FM STEREO TUNER TU-201SA
1 2
DOLBY REVERSE REC
5 4
ON / STANDBY NR / RESET CD SRS / REC MUTE
DRR-201SA
REC LEVEL / 0 1
8 9
L 6 7
dB -60 -40 -30 -20 -12 -6 -2 0
R +
3 DOLBY NR B
STEREO CASSETTE TAPE DECK DRR-201SA
5