Tabla de contenido
Idiomas disponibles
Idiomas disponibles
ENGLISH
10
6
Put the dustbag holder back into the vacuum cleaner (Fig. 25).
Note: If no dustbag has been inserted, you cannot close the cover.
7
Push the cover downwards to close it.
Replacing the HEPA exhaust filter
Replace the HEPA exhaust filter every 6 months.
1
To open the HEPA exhaust filter grille, grab the tabs and pull the grille upwards to remove it
from the appliance (Fig. 26).
2
Remove the old HEPA exhaust filter.
3
Place the new HEPA exhaust filter into the appliance.
4
To close the HEPA exhaust filter grille, first align the lugs on the top of the grille with the
slots in the appliance (1). Then press the tabs downwards until the grille locks into place
(2) ('click') (Fig. 27).
Ordering accessories
To buy accessories or spare parts (such as dustbags, filters and additional nozzles),
visit www.shop.philips.com/service or go to your Philips dealer. You can also contact the Philips
Consumer Care Centre in your country (see the worldwide guarantee leaflet for contact details).
Ordering dustbags
-
Philips Classic s-bag
®
-
Philips Clinic s-bag
®
-
Philips Anti-odour s-bag
-
Reusable dustbags (some countries only) are available under code number 4322 004 93370.
Note: Please visit www.s-bag.com for more information about the s-bag.
Ordering filters and accessories
-
HEPA exhaust filters are available under type number FC8070.
Environment
-
Do not throw away the appliance with the normal household waste at the end of its life, but
hand it in at an official collection point for recycling. By doing this, you help to preserve the
environment (Fig. 28).
Guarantee and support
If you need information or support, please visit www.philips.com/support or read the separate
worldwide guarantee leaflet.
All manuals and user guides at all-guides.com
synthetic dustbags are available under type number FC8021.
high filtration synthetic dustbags are available under type number FC8022.
synthetic dustbags are available under type number FC8023.
®
Tabla de contenido
