Brakes; Lifting Capacity Diagrams; Failures; Figure 2 Activate And Release The Brake - HanseLifter SDJ Serie Instrucciones De Uso

Brakes

Lifting capacity diagrams

Figure 3 Lifting capacity diagrams

Failures

Attention!
After having used the platform floor truck for extended periods of time, the pins in the oil boring may jam and oil may
accumulate so that the platform floor truck cannot be lowered any more.
If this is the case, please ensure that the following steps are implemented by specialised technicians:
• Loosen the screw from the valve seat, then let the steel ball flow out together with the hydraulic oil.
• There is a small boring next to the valve, the diameter of which is between 0.5 and 0.8mm.
• Try to cleanse the same using a thin wire.
•
Reassemble the steel ball to its original location. In this, use the drawing as an orientation. Then, close the valve
seat. Please observe that the pin is not bent and that the valve seat is not damaged.
Page 10 of 13

Figure 2 Activate and release the brake

Duplication, even in parts, is not permissible.
Please keep attention
on the loading capacity
diagram of the stacker. The
vertical axis indicates the
loading weight and the
horizontal indicates the
distance to fork face- The
diagrams show the maximum
working load.
SDJ - Series