Ec Declaration Of Conformity - HanseLifter SDJ Serie Instrucciones De Uso

Ocultar thumbs Ver también para SDJ Serie:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 41
Preface
Thank you very much for having bought a product of HanseLifter®.
These operating instructions contain a description of how to use the device properly. They indicate safe
handling procedures and show you how to maintain and service the device properly. All persons working with
the product (operator, service employee, safety officer, etc.) have to have read and understood these operating
instructions. This is the only way for you to use the full potential of the HanseLifter® product.
If you have any questions after having read these operating instructions, please contact your dealer or please
contact us.
HanseLifter® – Straubinger Str. 20 – 28219 Bremen, Germany
On the basis of constantly reviewing design and technology it is possible that there are differences between the
descriptions and the parts actually installed into the lifting fork. The installed parts deviating is also possible on
the basis of special customer requirements. If the aforementioned is the case, please contact us.

EC declaration of conformity

Straubinger Straße 20
28219 Bremen
Germany
Documentation procurator
Hardy Klapproth
Straubinger Straße 20
28219 Bremen
Herewith we declare that the design of
Denomination: HanseLifter – platform floor truck
Machine type:
corresponds to the following European directives and harmonised standards that have been applicable at the
issue date mentioned below in the updated modification sin each case.
EC ordinance
2006/42/EC
1907/2006/EC
The used liquid substances in our product are incorporated in an integrated manner so that the substances
are not release in case of intended use. Thus, our products fall under article 7(2) and are not subject to the
registration obligation according to article 6 or 7(1).
Applied harmonised standards
DIN EN ISO 12100:2011 Machine safety
EN 1757-1:2001-04
Bremen, October 2011
Page 2 of 13
SDJ1012-01, SDJ1016-01, SDJ1025-01, SDJ1030-01
LP1100
Machine directive
REACH
Safety of industrial trucks
Duplication, even in parts, is not permissible.
______________________________
Managing director: Dr. J. Lührs
SDJ - Series
Tabla de contenido
loading

Este manual también es adecuado para:

Dj1012Sdj1016Sdj1025Sdj1030Sdj1516Sdj1016bs

Tabla de contenido