6
Step 6 Continued...
For Industrial Installation: Attach
rubber grommet assembly to the top
of the downrod being careful to firmly
secure the lock-pin.
Industrial Installation
Safety Bolt
and Nut (S6)
7
Step 7
For blade assembly, use motor screws
(S4) and insert through top of blade
holder and into motor housing unit.
Tighten securely.
Fan Housing & Motor
All manuals and user guides at all-guides.com
Lock-pin
Canopy (5)
Screw (S2)
Flange Cover (6)
Set Screw (A)
Motor Housing (7)
3 Blade Installation
Motor Screws (S4)
Blade (8)
8a
For added security, attach safety cable from fan unit to "J" hook (S7) in
outlet box. Secure by looping zip tie (S8) through safety cable and "J" hook.
Tighten zip tie securely. Lift fan onto the mounting bracket (#1). Turn
housing until hanging ball seats itself into ball socket (listen for click).
OUTLET BOX
Green Ground Wire
NOTE: Parts furnished will allow
"J" Hook (S7)
you to install your fan at up to a 35°
angle. Angles greater than 35° will
require a 45° angle adapter (see
dealer). NOTE: J Hook installation
is a Canadian requirement only.
WARNING: To reduce the risk of fire, electric shock or personal injury, mount
so outlet box marked "acceptable for fan support" and use mounting screws
provided with the outlet box. Most outlet boxes commonly used for the support
of lighting fixtures are not acceptable for fan support and may need to be replaced.
Consult a qualified electrician if in doubt.
Step 8a
Support Beam
"J" Hook (S7)
Outlet Box (A)
Ceiling
Mounting Bracket (#1)
Zip Tie (S8)
Safety Cable