Setting Pabx Code - Daewoo International DTC-370 Manual De Instrucciones

SETTING A NUMBER AS VIP
In on-hook state, review the desired incoming or outgoing number,

Press VIP/P key to set the number as VIP number. There will be a

Press VIP/P key again, the VIP number will become to ordinary number and the

The number set as VIP number can not be deleted, but when press DEL key for 3 seconds, all numbers
will be deleted including the VIP numbers.
Notes:

When the number stored full, the unit will auto-cover the earliest ordinary one except of VIP number.

But if the numbers are all set as VIP number and the memory is full, the unit will auto the earliest VIP
number. It will ring a special ringing tone when a VIP call comes.
SETTING MENU
SETTING DATE AND TIME

In on-hook state, press SET/ST key, LCD displays SET 1 DATE.

Press SET/ST key, the last two digits of year flash.

Press ▲ or ▼ key to edit the year, press SET/ST key to confirm, by using the same method to set the
month, date, hour and minute. Press DEL key to quit.
Note: Month: 1-12 Date: 1-31
SETTING LOCAL AREA CODE
You can set a local area code useful in some countries to avoid dialing the area in every call, if you do not wish
to set a code, you can leave it as CODE - - - - -.

In on-hook state, press SET/ST key and then press ▲ key, LCD will display SET 2 CODE

Press SET/ST key again, LCD displays CODE - - - - -

Press ▲ or ▼ key to set the first digit of local area code.

Press SET/ST key to confirm and enter the second digit setting, follow same steps to set the last 4 digits.

Press DEL key to quit.
Note: If the local area code only 4 digits, the last digit can be left as "-". After set the local area code, unit will
auto-filter the area code if the incoming call number with the first several digits as same as the local area code.

SETTING PABX CODE

You can set a PABX code when the phone is connected to a telephone switchboard, this will avoid you to dial
the code each time you want to dial an outgoing number, if not, leave this code empty PCODE --,

In on-hook state, press SET/ST key and then press ▲ key 2 times, LCD will display SET 3 PCODE.

Press SET/ST key to confirm, LCD displays PCODE --, the first "-"flash and indicate to set the first digit of
PABX code.

Press ▲ or ▼ key to set the PABX code. Press SET/ST key to confirm and enter the second digit setting.

Following same steps to set the second digit.
Notes:

If only one digit of PABX code, left the second digit as"-".

If set PABX code, when dialing back incoming call or pre-dial a number, and if the number is 6 digits or
more than 6 digits, the telephone will auto-add PABX code ahead the incoming number or the pre-dialing
number which is not lead by PABX code and then pause 1 second.
All manuals and user guides at all-guides.com
DTC-370
Hour: 00-23 Minute: 00-59
14
icon displayed on LCD.
icon will disappear.