Electrical Characteristics - PNI ENT-ACC 25 Manual De Usuario

PNI photovoltaic modules contain a hydrophobic antireflex coating on the
glass surface to improve the output power and reduce the accumulation of dirt
and dust.
To avoid damaging the modules, do not clean the photovoltaic modules with an
electric washing machine or a pressure washer.
Do not use steam or corrosive chemicals to clean the modules.
Do not use aggressive tools or abrasive materials that could scratch or damage
the glass surface.
Failure to comply with these requirements may adversely affect the
performance of the photovoltaic module.
PNI photovoltaic modules are designed to withstand heavy snow loads.
However, if you want to remove snow to improve strength, use a brush to gently
remove snow. Do not attempt to remove frozen snow or ice from photovoltaic
modules.
Dismantle of solar panels
The dismantling of the photovoltaic systems must be carried out with the same
care and safety measures used during the initial installation.
The photovoltaic system can generate dangerous voltage even after it has been
disconnected.
Observe the safety rules for working with live electrical equipment.
Dispose of waste from voting systems according to local legislation.

Electrical characteristics

The values on the identification label are average values. The electrical
characteristics are within +/- 10% of the indicated values of Isc, Voc and Pmax
in standard test conditions (irradiation of 1000 W / m2, AM 1.5 spectrum and
a cell temperature of 25 ° C).
User manual 22