Fault Indicator - ESAB Cutmaster 120 Manual Del Usuario

5.04 Fault Indicator

At initial power up, two lights will temporarily illuminate for 2-3 seconds to show the version of software used.
To determine the first digit, count the function indicators left to right, 1 through 5. To determine the second digit
count the pressure indicators, reading from bottom to top, 0 through 7. In the example below the Temp indicator
and 75 psi indicators are on indicating the version would be 2.3.
7
6
5
A
MIN MAX
PSI
MAX
4
3
2
1
MIN
0
!
1 2 3 4 5
!
When the "Fault" indicator is ON or blinking it will be accompanied by one of the pressure indicator lights
depending on what the Fault is. The following table explains each of those Faults.
NOTE!
Fault explanations are covered in the following tables.
300X5398
All manuals and user guides at all-guides.com
BAR
MAX
+
MIN
Art# A-07988
Pressure Fault
Indicator
Max Over Pressure
90 Internal Error
85 Check Consumables
80 Consumables Missing
75 Start Error
70 Parts in Place
65 Input Power
Min Under Pressure
ESAB CUTMASTER 120
SERVICE
5-3