Install The Roof Vent; Securing The Refrigerator - Dometic 10 Serie Instrucciones De Montaje

RM10.5(S)(T), RMS10.5(X)(S)(T)
5.6

Install the roof vent

No. in
fig. f, page 10
1
2
1. Seal the installation frame to make the connection waterproof (fig. g, page 10).
2. Insert the installation frame and screw it down tightly (fig. h, page 11). Use all
the fixing holes for this.
3. Insert the hood and screw it down tightly (fig. i, page 11).
5.7

Securing the refrigerator

!
CAUTION!
Only screw through the receptacles provided, otherwise foamed com-
ponents, such as cables, can be damaged.
I
NOTE
Attach the side walls or the attached strips so that the screws are tight,
even when under increased loads (while driving).
1. Move the refrigerator into its final location.
2. Fasten the screws (fig. j 1, page 11) through the plastic jacket in the sides of
the refrigerator, and further into the wall.
3. Put the caps (fig. j 2, page 11) onto the screw heads.
EN
Description
Hood
Installation frame
Installing the refrigerator
25