Changing The Display Resolution (Resolution) (For Hd15 Only) - Sony SDM-H246W Manual De Instrucciones

15 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
16 Press the m/M buttons to center the test pattern on
the screen.
17 Click "Next".
Click "End" or "EXIT" to turn off the test pattern.
When Auto run fails to operate:
1
Open "My Computer" and right click the CD-ROM
icon.
Go to "Explorer" and open the CD-ROM icon.
2
Open [Utility] and then select [WINDOWS].
3
Start [WIN_UTILITY.EXE].
Test pattern appears. Go to step 4.
For Macintosh User
1
Open the CD-ROM.
2
Open [Utility] and then select [MAC].
3
Open [MAC UTILITY] and then start
[MAC_CLASSIC_UTILITY] or [MAC_OSX_UTILITY].
Test pattern appears. Go to step 4.
4
Press the MENU button.
The main menu appears on the screen.
5 Press the m/M buttons to select
press the OK button.
The Screen menu appears on the screen.
6 Press the m/M buttons to select PHASE and press
the OK button.
The PHASE adjustment menu appears on the screen.
7 Press the m/M buttons until the horizontal stripes
are at a minimum.
Adjust so that the horizontal stripes are at a minimum.
8 Press the OK button.
The main menu appears on the screen.
If vertical stripes are observed over the entire screen, adjust
the PITCH using the following procedures.
9 Press the m/M buttons to select PITCH and press the
OK button.
The PITCH adjustment menu appears on the screen.
10 Press the m/M buttons until the vertical stripes
disappear.
Adjust so that the vertical stripes disappear.
11 Press the OK button.
The main menu appears on the screen.
12 Press the m/M buttons to select H CENTER or V
CENTER and press the OK button.
The H CENTER adjustment menu or V CENTER adjustment
menu appears on the screen.
13 Press the m/M buttons to center the test pattern on
the screen.
14 Click "END" on the screen to turn off the test
pattern.
x Changing the display resolution
(Resolution) (for HD15 only)
You can change the display resolution when the current input is
different from the one displayed on the screen.
Tip
Some of the output signals from your computer may not be recognized on
the display by assigning the default setting of resolution. The actual
resolution may not be displayed as you have selected. Use this function
(Screen) and
only when you want to change the display resolution.
1 Press the MENU button.
The main menu appears on the screen.
2 Press the m/M buttons to select
press the OK button.
The "Screen" menu appears on the screen.
3 Press the m/M buttons to select "Resolution" and
press the OK button.
The "Resolution" menu appears on the screen.
4 Press the m/M buttons to select the resolution you
want to display, and press the OK button.
19
(GB)
Screen HD15
Zoom : Full
Display Area :
Auto Adjust : Off
Phase : 30
Pitch : 0
H Center : 50
V Center : 50
1680 × 1050
Resolution
1400 × 1050
1680 × 1050/60 Hz
Select Set Exit
OK MENU
(Screen) and