To Save A Setup To Registration Memory; To Recall A Setup From Registration Memory - Casio WK-200 Guia Del Usuario

WK200_e.book 47 ページ ２００８年５月１６日 金曜日 午後８時４４分
To save a setup to registration
memory
1.
bq
Press .
Lights
Bank number
2.
Configure the tone, rhythm, and other settings
you can to include in the setup.
3.
bt
Press to select the bank you want.
bt
Each press of cycles through the bank numbers.
Bank 4
• You also can select a bank by holding down
bs
use the (10-key) number buttons to enter a bank
number.
4.
co
While holding down , press a button from
cn
to to select an area.
This will save the settings you configured in step 2 into the
applicable setup.
• If there is anything already stored in the setup, it will be
replaced (deleted) by the new setup.
Stored in Setup 4-1
S t o r e
All manuals and user guides at all-guides.com
Saving Keyboard Setups to Registration Memory
1.
2.
bt
as you
• Notes currently being sounded by the keyboard may stop if
ck
■ Saving registration Data on an External Device
• SD memory card (WK-500 only) (page E-61)
• Computer (page E-68)
■ Maintaining Data in Registration Memory
After you save data in registration memory, it will remain there
as long as power is supplied to the keyboard. However, if you
disconnect the AC adaptor when there are no batteries
loaded, data in registration memory will be deleted.
Tips for Maintaining Data
• Use both batteries and the AC adaptor together.
• Make sure that batteries with sufficient power are loaded
• Connect the AC adaptor to the keyboard and plug it into a
Before connecting or disconnecting the AC adaptor or
replacing batteries, first press
To recall a setup from registration
memory
bt
Press to select the bank that contains the
setup you want to recall.
ck cn
Use buttons to to select the area whose
setup you want to recall.
This will recall the registration memory setup and
automatically configure the Digital Keyboard settings
accordingly.
Setup 6-1 recalled
R e c a l l
you recall a setup that causes a change in octave shift
(page E-16). To keep this from happening, either select a
setup that does not cause a change in the octave shift
setting, or hold down the pedal (which will cause notes
currently being played to be sustained).
whenever you disconnect the AC adaptor.
power outlet before replacing batteries.
1
to turn off power.
Bank 6
E-47