Stihl BG 56 Manual De Instrucciones página 21

5
3
Pull off the retainer (3) and take the
N
air filter element (4) out of the filter
housing (5).
Replace the filter element. As a
N
temporary measure you can knock it
out on the palm of your hand or blow
it out with compressed air – do not
wash.
Replace any damaged parts.
Installing the filter element
Fit the filter (4) in the filter
N
housing (5) and push the
retainer (3) into position.
Refit the filter cover (2) and turn the
N
filter cover lock clockwise to the
horizontal position.
BG 56, BG 56 C, BG 66, BG 86, BG 86 C, SH 56, SH 56 C, SH 86, SH 86 C
Version with Pleated Filter Material
2
Unscrew the filter cover lock (1)
N
counterclockwise.
Remove the filter cover (2).
N
Clean away loose dirt from around
N
the filter.
4
Take the air filter (3) out of the filter
N
housing (4).
Cleaning the air filter
Carefully knock the filter out on the
N
palm of your hand or blow it clear
with compressed air from the inside
outwards.
In case of stubborn dirt or sticky filter
fabric
Wash the air filter in STIHL special
N
cleaner (special accessory) or a
clean, non-flammable solution (e.g.
warm soapy water). Rinse the filter
1
2 2
3
from the inside outwards under a jet
of water – do not use a pressure
washer.
Dry the filter – do not expose to high
N
temperatures.
Place the filter in position.
Install the filter element in the filter
N
housing.
Fit the filter cover and tighten the
N
filter cover lock clockwise.
English
19