Resumen de contenidos para Mitsubishi Electric Mr.SLIM PEAD-M35JA2
Página 1
<ORIGINAL> Packaged Air-Conditioners INDOOR UNIT PEAD-M35,50,60,71,100,125,140JA2 PEAD-M35,50,60,71,100,125,140JAL2 PEAD-SM35,50,60JA PEAD-SM35,50,60JAL PEAD-SM71,100,125,140JA2 PEAD-SM71,100,125,140JAL2 English OPERATION MANUAL FOR USER Deutsch BEDIENUNGSHANDBUCH FÜR BENUTZER Français MANUEL D’UTILISATION POUR L’UTILISATEUR Nederlands BEDIENINGSHANDLEIDING VOOR DE GEBRUIKER Español MANUAL DE INSTRUCCIONES PARA EL USUARIO Italiano ISTRUZIONI DI FUNZIONAMENTO PER L’UTENTE Ελληνικά...
2006/66/EC Article 20 Information for end-users and Annex II. Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality materials and components which can be recycled and/or reused. This symbol means that electrical and electronic equipment, batteries and accumulators, at their end-of- life, should be disposed of separately from your household waste.
1. Safety Precautions • Only use means recommended by the manufacturer to accelerate • Do not pierce a hole in or burn this indoor unit or refrigerant the defrosting process or to clean. lines. • This indoor unit shall be stored in a room that has no •...
2. Parts Names ■ Wired Remote Controller Controller interface The functions of the function buttons change depending on the screen. Refer to the button function guide that appears at the bottom of the LCD for the functions they serve on a given screen. When the system is centrally controlled, the button function guide ⑤...
Página 5
2. Parts Names Display The main display can be displayed in two different modes: “Full” and “Basic”. The factory setting is “Full”. To switch to the “Basic” mode, change the setting on the Main display setting. (Refer to operation manual included with remote controller.) <Full mode>...
3. Operation ■ About the operation method, refer to the operation manual that comes with each remote controller. 3.1. Turning ON/OFF 3.1.1. For wired remote controller [ON] [OFF] Press the [ON/OFF] button. Press the [ON/OFF] button again. The ON/OFF lamp will light up in green, The ON/OFF lamp will come off, and and the operation will start.
3. Operation Automatic operation 3.4. Fan speed setting ■ According to a set temperature, cooling operation starts if the room 3.4.1. For wired remote controller temperature is too hot and heating operation starts if the room temperature is too cold. ■...
3. Operation 3.5. Ventilation (For wired remote controller) <Returning to the Operation menu> 3.5.1. Navigating through the Main menu Press the [RETURN] button to go back to the Operation menu. <Accessing the Main menu> Press the [MENU] button. The Main menu will appear. <Item selection>...
4. Timer ■ Timer functions are different by each remote controller. ■ For details on how to operate the remote controller, refer to the appropriate operation manual included with each remote controller. 5. Care and Cleaning ► Cleaning the filters ►...
6. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Air conditioner does not heat or cool well. ■ Clean the filter. (Airflow is reduced when the filter is dirty or clogged.) ■ Check the temperature adjustment and adjust the set temperature. ■...
6. Trouble Shooting Having trouble? Here is the solution. (Unit is operating normally.) Noise is louder than specifications. ■ The indoor operation sound level is affected by the acoustics of the particular room as shown in the following table and will be higher than the noise specification, which was measured in an echo-free room.
Página 12
0.21 Note: Recycle Rating condition Your MITSUBISHI ELECTRIC product is designed and manufactured with high quality Cooling - Indoor: 27ºC DB, 19ºC WB materials and components which can be recycled and reused. Electrical and electronic Outdoor: 35ºC DB, 24ºC WB equipment, at their end-of-life, should be disposed of separately from your household Heating - Indoor: 20ºC DB, 15ºC WB...
Página 14
2021 (7) Manufacturer MITSUBISHI ELECTRIC CORPORATION HEAD OFFICE: TOKYO BUILDING 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN AUTHORIZED REPRESENTATIVE IN EU: MITSUBISHI ELECTRIC EUROPE B.V.HARMAN HOUSE, 1GEORGE STREET, UXBRIDGE, MIDDLESEX UB8 1QQ, U.K. COMMERCIAL REGISTRATION NO.33279602 (8) Model number PEAD- PEAD-...
Página 16
NETTLEHILL ROAD, HOUSTOUN INDUSTRIAL ESTATE, LIVINGSTON, EH54 5EQ, SCOTLAND, UNITED KINGDOM hereby declares under its sole responsibility that the air conditioners and heat pumps described below for use in residential, commercial and light-industrial environments: MITSUBISHI ELECTRIC, PEAD-M35JA2, PEAD-M50JA2, PEAD-M60JA2, PEAD-M71JA2, PEAD-M100JA2, PEAD-M125JA2, PEAD-M140JA2, PEAD-M35JAL2, PEAD-M50JAL2, PEAD-M60JAL2, PEAD-M71JAL2, PEAD-M100JAL2, PEAD-M125JAL2, PEAD-M140JAL2,...
Página 17
<ENGLISH> <PORTUGUÊS> English is original. The other languages versions are translation of the original. O idioma original é o inglês. As versões em outros idiomas são traduções do idioma original. CAUTION CUIDADO • Refrigerant leakage may cause suffocation. Provide ventilation in accordance with EN378-1. •...
Página 18
<MAGYAR> Az eredeti szöveg angol nyelven íródott. A más nyelven írt változatok az eredeti szöveg fordításai. FIGYELMEZTETÉS • A hűtőközeg szivárgása fulladást okozhat. Gondoskodjon a szellőzésről az EN378-1 szerint. • Feltétlenül gondoskodjon a csövek szigeteléséről. A fedetlen csövek közvetlen megérintése égési vagy fagyási sérülést okozhat.
Página 20
This product is designed and intended for use in the residential, commercial and light-industrial environment. Please be sure to put the contact address/telephone number on this manual before handing it to the customer. HEAD OFFICE: TOKYO BLDG., 2-7-3, MARUNOUCHI, CHIYODA-KU, TOKYO 100-8310, JAPAN KJ79P608H03_en...