Trouble Shooting; Spare Parts Order - Parkside PHD 100 A1 Traducción Del Manual De Instrucciones Original

Trouble shooting

Problem Possible cause
ON / OFF switch (5) is turned
off
Washer is
not opera-
Damaged power supply cable
ting
Mains fault
Air trapped in the pressure
Washer
washer
does not ge-
nerate any
Drop in the water mains
pressure
pressure
Severe
High-pressure nozzle (13) is
pressure
dirty
fluctuations

Spare Parts Order

When buying parts for the pressure washer, use the service address or fax number
given.
Please enter your machine type and the product number of the part you are ordering.
Item Description ........................................................................... Product No.
14 Cleaning agent container with nozzle
13 High-pressure nozzle .................................................................
1-2 High-pressure hose ....................................................................
12 Adjustable flat-jet nozzle.............................................................
11 Jet lance ....................................................................................
10 Gun ............................................................................................
All manuals and user guides at all-guides.com
Remedy
Check ON / OFF switch
Check power supply cable (7) for
damage. If necessary have the power
supply cable (7) replaced by a qualified
electrician.
Check the electrical system for confor-
mity with the data on the rating plate.
Turn on the washer with high-pressure
hose until bubble-free water flows out
of the high-pressure connection (3).
Check the water mains.
Rinse the high-pressure nozzle (13)
with water. If necessary clean the noz-
zle hole with a needle.
........................................
GB MT
91096764
91096765
91096766
91096767
91096768
91096769
43