Intended Use; Operating Instructions; Assembly And Operation - Worx NITRO SWITCHDRIVER WX177L Manual Del Usuario

Chuck capacity
Steel
Max. drilling
capacity
Wood
Machine weight
(bare tool)
** X may be followed by one or two characters. All mod-
els are the same except model number and trademark.
The suffix in models may be number from "1" to "999"
or English letter "A" to "Z" or "M1" to" M9" which means
different package or the various of accessories packed
in the package.
***Voltage measured without workload. Initial battery
voltage reaches maximum of 20 volts. Nominal volt-
Recommended pilot-hole size for Screws:
Gauge 2
Head-Bore
Size
11/64˝
Shank-Hole
Size
3/32˝
Hard-
wood
Pilot- 1/16˝
Hole
Size
Soft-
wood
1/16˝

4. INTENDED USE

The machine is intended for drilling (including pilot
hole) in wood, metal and plastic as well as for driving
and removing fasteners.

5. OPERATING INSTRUCTIONS

NOTE: Before using the tool, read the
instruction book carefully.

ASSEMBLY AND OPERATION

20V Cordless Brushless SWITCHDRIVER 2.0
1/4 inch (6.35mm)
1/2 inch (13mm)
1-8/5 inch (40mm)
1.85 lbs (0.84 kg)
3 4 5
13/64˝
15/64˝
1/4˝
7/64˝
7/64˝
1/8˝
1/16˝ 5/64˝
5/64˝
1/16˝ 1/16˝ 1/16˝
age is 18 volts.
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to the
accessory packaging for further details. Store person-
nel can assist you and offer advice.
6 7 8
9/32˝
5/16˝
11/32˝
9/64˝
5/32˝
5/32˝
3/32˝
7/64˝
7/64˝
5/64˝
3/32˝ 3/32˝
ACTION
STARTING THE MACHINE FOR THE
FIRST TIME
Removing the Battery Pack
Charging the Battery Pack
More details can be found in charger's
manual
Type Capacity
WA3575 2.0 Ah
WA3881 2.0 A
9 10 12
23/64˝
25/64˝
7/16˝
11/64˝
3/16˝
7/32˝
1/8˝
1/8˝ 9/64˝
7/64˝
7/64˝
1/8˝
FIGURE
See Fig. A1
See Fig. A2
14
1/2˝
11
1/4˝
5/32˝
9/64˝
EN