Troubleshooting Support - DURAVIT SensoWash Slim Manual De Instrucciones

9. Troubleshooting support

If your unit does still not work properly after following the instructions mentioned
below, contact [email protected]. Have the article and serial number ready. The-
se can be found on the nameplate on the back of the operating instructions.
Problem
Indicator lamps and alarm function
The "Status LED"
EN
on the unit flashes
red once each 3
seconds.
The "Status LED"
on the unit flashes
red three times
each 3 seconds.
The "Status LED"
on the unit flashes
red four times each
3 seconds.
A continuous con-
firmation tone is
audible.
General function
SensoWash ®
working.
32
Potential cause
Malfunction.
B
Malfunction.
B
Malfunction.
B
Malfunction.
is not SensoWash
ched on. ("Status LED"
is not illuminated)
SensoWash
mode. ("Status LED"
red illuminated)
Solution
> Switch off SensoWash
> Switch on SensoWash
again.
If flashing does not stop:
> Cut off power supply.
> After 30 sec. connect it
again.
> Contact help@duravit.
com
> Turn off "Water tempera-
ture"
> Activate any shower
function.
> Cut off the power supply.
> After 30 sec. connect it
again.
® is not swit- > Switch on the main power
B supply.
® is in Standby > Switch to "On mode".
B is
® .
®
.
6
Ch.
6.2
6.1