ENGLISH
TRACK SKIP
1. Pressing the key (10) during playback to skip to the next track, while the key (9) will allow you to go back to the previous
track.
2. Press and hold the key (10) or the key (9) during playback for a fast search for a special section of the track.
3. Release the key to return to normal playback mode.
REPEAT FUNCTIONS
By pressing the REPEAT key (13) more than once on the remote control, you can activate the following functions:
1. ONE: continuous playback of a single track (the RPT icon is displayed).
2. ALL: continuous playback of all tracks.
3. OFF: repeat function off.
EQUALISATIONS
Press the EQ key(12) more than once to select different kind of dynamic audio equalisations.
LINE-IN INPUT
1. Connect any unit with an audio output with the specific cable to the AUX-IN input (2).
2. Switch the appliance on and press the FUNCTION key on the remote control until LINE is displayed.
3. Control the external unit with its controls.
Note: in the absence of signal, the unit goes into Standby mode automatically after about 10 minutes.
AUTO STANDBY
In compliance with current regulations on energy saving this unit is equipped with Auto-Standby function.
- With player SD / USB function if it does not play any track goes into Standby mode automatically after about 10 minutes.
- With LINE IN function there is absence of signal, the unit goes into Standby mode automatically after about 10 minutes.
Attention: the unit at low volume can happen to be activated incorrectly Auto Standby, in this case slightly raise the volume
TECHNICAL FEATURES
GENERAL FEATURES
Power supply:
Maximum output power:
Central unit size:
Speakers size:
RADIO SECTION
Frequency bands:
All manuals and user guides at all-guides.com
..AC 230V 50Hz - Standby power <0.5W
............................................... 8W + 8W
....................................111x160x210mm
....................................100x160x200mm
................................. FM 87.5 - 108 MHz
8
MCX 1021 USB