Operation - Temper KCM-RJ-0767493 Instrucciones De Operación

VDV Wire Tester

4.Operation

4-1.Voice
WARNING: Exposure to voltage can damage the tester, immediately disconnect the cable under
test if the Voltage warning appears on the display. Make sure the cable is not connected to any
device that can supply voltage before retesting. Do not connect two different cables into the Voice
(RJ11/12) and Data (RJ45) test ports at the same time. The cables will interact with each other and
alter test results.
1.Press ON/OFF Button to turn on the tester and then press Voice Button to select the voice
wire test function.
2.Connect one end the cable under test to the RJ11/RJ12 port on the tester.
3.Connect the other end of the cable under test to the RJ11/RJ12 port on the remote.
4.Interpret the results using the wiring and display examples on Page 13.
Note: Split may appear on the display when testing cables that have no twisting on the pairs.
Remote
9