Operation; The Induction Fields; Safety Cut-Off - Silvercrest SDI3500 D4 Instrucciones De Uso

Operation

The induction fields
The induction fields 1/3 have the following output levels:
Power levels
Left induction
field 1 (in watts)
Right induction
field 3 (in watts)
Both induction fields 1/3 have 19 temperature levels:
Temperature levels
in °C
Although the two induction fields 1/3 are optically identical, the left induction
field 1 is more powerful than the right one 3. Therefore, bear in mind that you
can cook the same amount of food more quickly on the left induction field 1
and it can also burn onto the pan more quickly.
Safety cut-off
■
■
NOTE
►
■ 10 │ GB │ IE
L01 L02 L03
200 400 600 800 1000 1200 1400 1600 1800 2000
200 400 600
60 70 80
160 170 180
For safety reasons, the pan detection function automatically switches the
appliance into standby mode when you remove the pan from the induction
field 1/3 or do not place a pan on it at all.
If you remove the pan from the induction field 1/3, you will hear a beep
after a few seconds which will repeat for approx. 1 minute. The display t
". If you place the pan back on the induction field 1/3
shows the error "
within this time, the previously defined settings will be retained. Otherwise,
the " " message will disappear after 1 minute and the appliance will switch
to standby mode.
As long as the temperature of the induction field 1/3 remains above
" will be shown on the display t.
60°C, "
L04 L05 L06
800 1000 1250 1500
90 100 110
190 200 210
L07 L08 L09
— —
120 130 140
220 230 240
SDI 3500 D4
L10
—
150
-