Programmed Play - Sharp CD-M10000W Manual De Manejo

Programmed play

CD-M10000W
ENGLISH
By specifying discs from 1 to 3, and tracks from 1 to 99, you can choose up to 32
selections for playback in the order you like.
1
Whilst in the stop mode, press one
of the 1 - 3 buttons to select the
desired disc.
2
Press the PRESET
PRESET button to select the
desired track.
You can also select a track by pressing the
trol.
E-17
Selected disc number
or
Selected track number
or button on the remote con-
3
Press the MEMORY/SET (MEMORY)
button to save the track number.
When the track is memorised, "MEMORY" will appear.
4
Repeat steps 1 - 3 for other tracks. Up to 32 tracks can be pro-
grammed.
If you make a mistake, the programmed tracks can be cleared by pressing the
CLEAR button.
5
Press the ( ) button to start playback.
To clear the programmed selections:
Press the CLEAR button on the remote control
whilst the "MEMORY" indicator is lit.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed. When all the tracks are cleared,
"MEMORY" will disappear.
Adding tracks to the programme:
If a programme has been previously stored, the "MEMORY" indicator will be dis-
played. Then follow steps 1 - 3 to add tracks. The new tracks will be stored after the
last track of the original programme.
Notes:
" Opening the disc tray automatically cancels the programmed sequence.
" Even if you press the ON/STAND-BY button to enter the stand-by mode or change
the function from CD to another, the programmed selections will not be cleared.
" During programme operation, random play is not possible.
01/10/1 CD-M10000W(X)E2.fm
Playback order