Radio; Memorizing Stations Automatically; Best Tuning Memory (Btm); Memorizing Only The Desired Stations - Sony CDX-C480 Manual De Instrucciones

Radio

Memorizing stations
automatically

— Best Tuning Memory (BTM)

The unit selects the stations with the strongest
signals and memorizes them in the order of
their frequencies. You can store up to 10
stations on each band (FM1, FM2 and AM).
Caution
When tuning in a station while driving, use
Best Tuning Memory to prevent accidents.
1
Press (SOURCE) repeatedly to select the
tuner.
Each time you press (SOURCE), the source
changes as follows:
CD ˜ TUNER
2
Press (MODE) repeatedly to select the
band.
Each time you press (MODE), the band
changes as follows:
z FM1 z FM2
3
Press (SHIFT).
4
Press (3) (PLAY MODE) repeatedly until
"BTM" appears.
5
Press (4) (n) until "B.T.M" appears.
The unit stores stations in the order of their
frequencies on the number buttons.
A beep sounds and the setting is stored.
6
Press (SHIFT).
Notes
• The unit does not store stations with weak
signals. If only a few stations are received, some
number buttons will retain heir former setting.
• When a number is indicated in the display, the
unit starts storing stations from the one currently
displayed.
• If a CD is not in the unit, only the tuner band
appears even if you press (SOURCE).
Memorizing only the
desired stations
You can store up to 10 stations on each band
(20 for FM1 and FM2, 10 for AM) in the order
of your choice.
1
2
3
4
Note
If you try to store another station on the same
number button, the previously stored station will
be erased.
z AM
Receiving the memorized
stations
1
2
3
Press (SOURCE) repeatedly to select the
tuner.
Press (MODE) repeatedly to select the
band (FM1, FM2 or AM).
Push the SEEK/AMS control up or down
to tune in the station you want to store
on the number button.
Press the desired number button ((1) to
(10)) for two seconds until "MEM"
appears.
The number button indication appears in
the display.
Press (SOURCE) repeatedly to select the
tuner.
Press (MODE) repeatedly to select the
band (FM1, FM2 or AM).
Press the number button ((1) to (10))
momentarily where the desired station is
stored.
EN
9