Technical Details; Technical Specifications - Bloom Diagnostics Bloom Lab Manual De Instrucciones

15. Technical details

15.1. Technical specifi cations
Power supply
Size
Weight
IP class
Environmental
Communication
Firmware Version
End of life
The Bloom Lab complies with the electromagnetic interference requirements of EN 61326-2-6:2013 and EN 61326-
1:2013. Further, it complies with the particular requirements for electromagnetic compatibility for medical devices ac-
cording to EN 60601-1-2 (see Table N°5 for immunity and emission levels).
Caution: Portable RF communications equipment (including peripherals such as antenna cables and external
antennas) should be used no closer than 30 cm (12 inches) to any part of the Bloom Lab, including cables specifi ed
by the manufacturer. Otherwise, degradation of the performance of this equipment could result.
The Bloom System should be used in a home or professional healthcare environment.
Emission
Test
Conducted emission
Radiated emission
4-3-6-2 Bloom Lab IFU, 09.04.2020, V1.0
100-240VAC (50/60 Hz) / 5VDC, 1.5 A via USB-C
100x115x110mm (WxLxH)
400g
IP51 (dust and dripping water protected)
+15°C to +40°C (Measurement)
-20°C to +60°C (Storage)
<80% Relative Humidity
Bluetooth Low Energy 4.2
Module Type Class 2
NFC , ISO/IEC 14443A compliant, 106 kbps transmission rate
1.1
5 years
Table N°4: Technical specifi cation
Limits
CISPR 11, Group 1, Class B
CISPR 11, Group 1, Class B
EN
13