System Setup - ILLUMINOSS SY- 2000 Instrucciones De Uso

PAGE 8 OF 121

7. System Setup

Connect power cord and foot pedal to rear
of the light source console and plug the
power cord into a grounded wall outlet.
Remove the protective cover from the light
guide mount.
Remove the protective cover from the light
guide. Visually inspect both ends to verify no
foreign material is present. The light guide
ends may be cleaned with 70% IPA as
3 required.
Insert Light Guide into Light Guide Mount
until it snaps in place. The GREEN "Light
Guide Seated" indicator will illuminate when
the light guide is properly seated and the
unit is turned on.
The Light Guide is now installed and ready
for use. The ends of the Light Guide should
be cleaned periodically with 70% IPA.
900093.W issued 01-JUL-21 PHOTODYNAMIC LIGHT CURING SYSTEM INSTRUCTIONS FOR USE - ILLUMINOSS MEDICAL INC