Tabla de contenido
1. Upper wheel hub bolt (×2)
1. Boulon supérieur de moyeu de roue (
2. Boulon inférieur de moyeu de roue (
1. Tornillo superior del buje de rueda (×2)
2. Tornillo inferior del buje de rueda (×2)
e
q
w
1. Locknut (×2)
3. Alignment marks
×
1. Contre-écrou (
2)
3. Repères d'alignement
1. Contratuerca (×2)
3. Marcas de alineación
q
w
2. Lower wheel hub bolt (×2)
×
2)
×
2)
q
w
2. Adjuster (×2)
×
2. Dispositif de réglage (
2)
2. Tornillo de ajuste (×2)
EBU00351
Drive chain slack adjustment
1. Loosen the rear wheel hub bolts.
2. Loosen the adjuster locknuts on each side.
To tighten the chain, turn the chain adjuster
clockwise. To loosen the chain, turn the
adjuster counterclockwise and push the
wheel forward. Turn each adjuster exactly
the same amount to maintain correct axle
alignment.
There are marks on each side of the
swingarm and on each chain adjuster. Use
them to check for proper alignment.
3. After adjusting, be sure to tighten the lock-
nuts and the wheel hub bolts.
Upper wheel hub bolt:
50 Nm (5.0 m0kgf)
Lower wheel hub bolt:
50 Nm (5.0 m0kgf)
8-75
Tabla de contenido
Solución de problemas
