Saurium HSD1G-75 Manual De Instrucciones página 70

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

plug
electrodes
Sparks at
the spark
plug
Air filter
Fuel filter
Fuel vent
The engine
Spark plug
turns, but
stalls or
Carburetor
does not
accelerate
Cooling
correctly
system
Spark
suppressor
The engine
does not
N/A
engage
STORING AND TRANSPORT
1. Clean all the outside surface of micro-cultivator. Don't damage stoving
varnish of components. Lay on appropriate engine oil if there's damage.
2. Clean engine air filter and muffler with water. Pay special attention prevent
water from entering air filter and muffler to avoid damage to engine.
Drain all the fuel in the fuel tank and carburetor.
a) Loose the oil drain bolt and contain the gasoline poured out with specialized
container.
b) After draining all the gasoline in the fuel tank and carburetor, reinstall oil drain
bolt and gasket.
3. Lay antirust oil on the unpainted aluminum alloy surface.
Electrical problem Ask your distributor for
Locked switch
Bad spacing of
the electrodes
contaminated
There is no
spark
contaminated
Defective spark
Dirty air filter
Fair wear and tear
Dirty fuel
Dirt or residue in
filter
Blocked fuel
Dirt or residue in
vent
Dirty or worn
Fair wear and tear Clean, adjust or replace
spark plug
Bad
adjustment
Prolonged use in
Excessive
dirty or dusty
Plate cracked,
contaminate
Fair wear and tear
d or
perforated
Internal engine
N/A
69
Adjust the gap to 0,6-
Electrodes
Electrodes
with fuel
Replace the spark plug
plug
the fuel
the fuel
Vibration
places
Ask your distributor for
problem
advice
0,7 mm
Clean or replace
Clean or replace
Clean or replace
Replace
Clean or replace
Adjust
Clean
Replace
advice
Tabla de contenido
loading

Productos relacionados para Saurium HSD1G-75

Tabla de contenido