Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Make sure the handle and safety features are in good working order. Never use a
machine that lacks a part or has been modified outside its specifications.
The enclosures must be correctly fitted and undamaged before you start the
machine.
WARNING!
Please always use quality gloves, foot, ear and eye protector. They should with
CE mark and tested according to PPE (Person Protective Equipment) directive.
The poor equipments may reduce the protection and result in person injure
during working.
Check the engine oil
Before starting the machine, ensure the crank case is filled to the top of the neck
with either SAE30 or 10W30, 4 storke oil.
1. before checking or refilling oil , besure the machine is put on even and stable
surface.
2. make sure the machine is switched off, by rotating the engine switch to the
"off" position.
3. remove the engine oil cap by rotating the cap anti-clockwise.
4. If the oil level is below the top of the oil tank housing neck refill with either
SAE30 (Single viscosity) or 10W30 (Multiviscosity) 4 stroke oil.
5. Screw in the engine oil cap.
59
Tabla de contenido
