Saurium HSD1G-75 Manual De Instrucciones página 63

 Open resistance buckle, hold tightly the clutch handlebar, press the belt
tensioner and when the power is transmitted to tiller, rotary blades begin
rotating.
 Back off the gear clutch, loosen the belt tensioner and when the power is
not transmitted to tiller, rotary blades stop rotating.
 Attention：Improper adjustment of clutch cables will influence its normal
use.
 First confirm the tensity of clutch cables. In normal state, there should be 4-
8mm degrees of freedom. If the degrees of freedom exceed the normal
range, please do suitable adjustments and fasten them up.
 If necessarily, start the engine to check if the tiller acts "on" and "off" freely.
The tiller have three gears, they are Forward 2 (fast), Forward 1 (slower) and
Reverse gear.
You can according to the work environment to choose the gears.
Start the engine
Open the fuel switch.
62