Saurium HSD1G-75 Manual De Instrucciones página 61

WARNING!
The oil will be contaminated or discoloured during use. Please change the oil
regularly.
For more information, please see clause: MAINTENANCE
Never use 4-stroke oil intended for water-cooled engines.
Never use oil intended for 2-stroke engines.
A poor oil quality may jeopardise function and decrease the life time of catalytic
converters.
Check the engine fuel
Only fuel the machine in well-lit areas. Avoid fuel spillage. Never refuel the
machine during operation. Let the engine cool down for about two minutes
before refueling.
Refueling must not be carried out near naked flames, control lamps or spark
producing electrical equipment such as electric tools, welders or sanders.
1. Make sure the machine is turned off, by turn the engine switch to the "off"
position.
2. Check the fuel by a visual check , remove the fuel cap and reviewing the fuel
level.
3. Full unleaded fuel from an approved fuel container into the fuel tank,
because of fuel expands, please fill the tank to the neck of tank only.
4. Turn the fuel cap clockwise to assembly it in position.
WARNING.
 Do not refill fuel while engine is running or hot.
 Make sure fuel is not leaking from the rear outlet tube of fuel drain hole.
Use at least 90 octane fuel. We recommend unleaded petrol as it leaves fewer
residues inside the motor and on the ignition plug, and prolongs the life cycle
of the exhaust system. Never use old or dirty petrol or oil/petrol mixtures.
Avoid contamination with dirt or water in the tank. Occasionally ignition
60