Saurium HSD1G-75 Manual De Instrucciones página 68

4. Reinstall the air filter.
WARNING:
The use of petrol or combustible solvents for cleaning can cause fire or explosion.
Therefore only use soap water or non-combustible solvent. Never operate the
machine without the air filter.
Spark plug
To ensure proper engine operation, the spark plug must be properly gapped and
free of deposits.
1. Remove the spark plug cap.
2. Clean any dirt from around the spark plug base.
3. Use the socket spanner which provided to remove the spark plug.
4. Visually inspect the spark plug. Remove carbon deposits using a wire brush.
5. Check for discoloration on the top of the spark plug. The standard color
should be a tan color.
6. Check the spark plug gap. The acceptable gap should be between 0,6-0,7
7. Install /reinstall the spark plug carefully by hand.
8. Once the spark plug has been seated, tighten it with a spark plug wrench.
9. Reinstall the spark plug cap on top of the spark plug.
Cleaning
1. Keep your machine clean, the outside of the machine can be cleaned using a
damp soft cloth with a mild detergent if required, never use water to clean
the machine as it may cause damage to internal parts.
2. Some maintenance products and solvents may damage the plastic parts,
these include products containing benzene. Trichloroethylene, chloride and
ammonia.
3. Take special care to keep the ventilation inlets /outlets free from obstruction.
Cleaning with a soft brush followed by a compressed air jet will usually be
67