Yamaha DPX-1300 Manual De Instrucciones página 37

Initial
Color System
INPUT A Signal
INPUT A Sync Type
INPUT B Signal
INPUT B Sync Type
HDMI Signal
DVI Signal
Auto Power Off
Auto Input Search
Display Language
Lamp Running Time
Reset
Selects the color system to use for video input signals.
Usually, set this parameter to Auto to have the unit automatically detect the signal and
select an appropriate color system. Set the unit manually to view NTSC4.43 images as it
cannot detect NTSC4.43 automatically.
Choices: Auto/NTSC/NTSC4.43/PAL/PAL-M/PAL-N/PAL60/SECAM
Selects the type of input signal received at INPUT A.
Choices: Component/RGB PC/RGB TV
Selects the sync type for signals received at INPUT A.
This function is only available for RGB TV.
Choices: Auto/Separate Sync/Composite Sync/Sync on Green
Selects the signal type received at INPUT B.
Choices: Component/RGB PC/RGB TV
Selects the sync type for signals received at INPUT B.
This function is only available for RGB TV.
Choices: Auto/Separate Sync/Composite Sync/Sync on Green
Selects the signal type received at the HDMI jack.
Choices: Auto/Component/RGB TV
Selects the signal type received at the DVI jack.
Choices: RGB PC/RGB TV
If the signal the unit is currently receiving stops and you do not perform any
operations for 30 minutes or more, the unit automatically places itself in
standby mode.
Choices: On/Off
Automatically changes inputs when the unit does not receive a signal.
If the signal the unit is currently receiving stops, or the input signal you selected the last
time you used the unit does is not available when you turn the unit power on, it
automatically searches through inputs for a signal in the following order.
INPUT A INPUT B
DVI INPUT A
Choices: On/Off
Selects the language used in the menu display.
Choices: /English/Deutsch/Español/Français/Italiano/Portuguêsa/
Displays the total lamp running time.
Opens the submenu to reset the running time. See page 45 for the operational procedure.
Resets menu settings to the factory presets.
Resets all the settings to the factory presets, and return the configurations stored in the
memory to the factory presets. See page 44, 53 and 54 for the operational procedure.
• [All Settings] : Return all settings in the [Initial] and [Setup] menu groups in the
main menu, and all configurations stored by the memory function, to
the factory presets.
• [All Memory] : Return all configurations stored by the memory function to their
default settings.
• [Current Memory] : Return the currently selected memory configuration (corresponding
to the signal input from the currently selected input jack) to their
default settings.
D4 VIDEO S VIDEO
Menu items
9
VIDEO HDMI
/
35