Yamaha DPX-1300 Manual De Instrucciones página 35

Signal
You can adjust the image when the unit is receiving an input signal.
Display Aspect Ratio
(Input signal)
Video/S-Video/Component/RGB TV/RGB PC
Overscan
(Input signal)
Video/S-Video/Component/RGB TV
3D Y/C Separation
(Input signal)
Video(NTSC)
Progressive Mode
(Input signal)
Video/S-Video/Component/RGB TV
Color Space Conversion
(Input signal)
Video/S-Video/Component
Setup Level
(Input signal)
Video/S-Video/Component/RGB TV
Sets the aspect ratio for projecting an image from an input signal.
See "Selecting a display aspect for projecting images", page 22.
Overscans video input sources for display.
Selects from [Standard] and [Full]. This parameter is not available when you select [Smart
Zoom] in [Display Aspect]. In some cases, noise may appear at the edges of the image
when you select [Full].
• [Standard] : approximately 94% video output ratio
• [Full] : approximately 100% video output ratio
Adjusts the quality of images input from VIDEO jack.
Suppresses the rainbow-like color and annoying dots in images. This function is only
available for NTSC format signals the unit receives at its composite input jacks.
Choices: On/Off
Switches the interlace/progressive (I/P) conversion mode.
(Only for interlaced TV signal).
• [Auto] : Detects the video, film and computer graphics (CG) contents and converts into
optimized progressive frames automatically.
• [Video] : Force to convert using motion-adaptive I/P conversion for video contents only.
• [Film] : Force to convert using pulldown I/P conversion for film or CG contents
only. Not recommended to use this mode unless a content consists of the
progressive frames clearly.
Selects color space coefficients.
• [Auto] : Selects the best color space coefficient for the image resolution.
• [SDTV] : Color space coefficient for BT.601 type signal.
• [HDTV] : Color space coefficient for BT.709 type signal.
Compensates for differences in the black levels of images.
• For signals equal to the pedestal level
• For signals with high levels of blackness : Set to [7.5%].
: Set to [0%].
%
100
0
PEDESTAL LEVEL BLACK LEVEL
Menu items
9
33