Schneider Altivar 61/71 Guía De Explotación página 34

Installation - Wiring
7 Connect the control cables:
- Connect control cable X20 on the braking unit to cable X20 on the drive
- Connect control cable X92 on the braking unit to connector X92 on the drive
- Disconnect cable X3 on the drive from connector X3 on the drive card
- Connect cable X3 on the drive to cable X3B on the braking unit
- Connect cable X3A on the braking unit to connector X3 on the drive card
X20 X20
X3A
8 Mount the DC choke chassis (C) on the wall or on the bottom of the enclosure. See the recommendations in the drive Installation Manual.
9 Detach removable part (D) from the DC choke chassis.
10 Mount the braking unit cover (E) on the DC choke chassis.
11 Install the DC choke(s) in accordance with the recommendations in the drive Installation Manual.
1757084 11/2009
X92
X3
X3B
X3
4x
X20 X20
X92
X3
X3A
X3B
X3
33