RIDGID R4010TR Manual Del Operador página 16

ASSEMBLY
INSTALLING THE MITER GUIDE
See Figure 13.
The miter guide can be used from both the left and right side
of the cutting wheel.
 Place the slot on the underside of the miter guide on the
sliding table fence.
 Lock the miter guide securely to the table by turning the
miter guide knob clockwise.
To adjust angles:
 Loosen the lock knob.
 Set to the desired angle by moving the guide left or
right.
 Tighten the knob securely before turning on the saw.
INSTALLING SLIDING TABLE ExTENSION
See Figure 14.
 From the side of the saw, align the pins on the sliding table
extension with the holes in the sliding table frame.
 Secure in place by turning the table extension lock knob
underneath the extension clockwise..
CONNECTING THE GARDEN HOSE
See Figure 15
The water supply must come from a fresh water main. NEVER
turn the water supply on high (fully opened).
The water supply valve provides a convenient on/off for
adjusting the water flow onto the cutting wheel. When used
properly, the water supply valve adjusts the water flow to
the perfect, optimal rate.
 Uncoil the garden hose.
 With the water main faucet turned completely off, attach
the end of the garden hose to the water supply valve.
Tighten by hand.
slidinG
slidinG
table
extension
16 — English
Miter
locK
Guide
Knob
table
table extension
Miter
Guide
Knob
slidinG
table
fence
Fig. 13
locK Knob
Fig. 14