flir T8 Serie Guia De Inicio Rapido página 9

3 EN-US English
3.6 Quick start guide
Follow this procedure:
1. Before starting the camera for the first time, charge the battery for 3 hours
using the stand-alone battery charger.
2. Put the battery into the camera battery compartment.
3. Insert a memory card into the card slot.
Note Empty or use a memory card that has not previously been used in an-
other type of camera. The cameras may organize files differently on the
memory card. There is therefore a risk of losing data if the same memory
card is used in different types of cameras.
4. Push the on/off button
5. Aim the camera toward the object of interest.
6. Adjust the infrared camera focus.
Note It is very important to adjust the focus correctly. Incorrect focus ad-
justment affects how the image modes work. It also affects the temperature
measurement.
7. Push the Save button to save an image.
8. When you have completed the inspection, connect the camera to a computer
using the USB cable.
9. Import the images into a FLIR Thermography software and create an inspec-
tion report.
3.7 View from the front
See Figure 2.1 View from the front, page 2.
1. Autofocus button.
2. Save button.
3. Viewfinder.
4. Knob to change the dioptric correction for the viewfinder.
5. Attachment point for the neck strap.
6. Laser receiver.
7. Laser transmitter.
8. Camera lamp (left and right sides).
9. Infrared lens.
10. Digital camera.
#T810412; r. AC/73580/73580; mul
to turn on the camera.
6