Urmet 1092/250 Guía Rápida página 5

ATTENTION: case of missing video on the connected device (monitor or DVR), verify
that the selected video output matches with the one selected on the device
In case of missing images in a DVR with AHD and CVBS inputs, try the following
steps:
1. Leave a single camera connected to the channel 1 of the DVR
2. Press the button for few seconds to right and left until the image appears on
the screen
3. If case of missing image again, press the button to down verify the type of
input selected on the DVR menu
MENU USE
The camera ref. 1092/250 uses a multi-level menu that allows to enable/disable or change camera settings.
Press the adjustment button on the micro camera connection wire while the camera is on and operating to
use the button and access the main menu.
Important note:
•
The OSD menu activation button is joystick type; it
is used to make selection operations easier.
MENUS SYSTEM DESCRIPTION
Once the menu access command has been performed pressing the central button, the access first screen
will be displayed.
Displayed items can be selected by pressing the down button.
Once the item has been selected, the parameter can be changed using the right button and choosing
among the available options, that can be displayed by pressing repeatedly the button.
By selecting the item associated to the symbols
where other changes can be performed.
To quit the menu or the submenu and confirm the executed changes, select the item EXIT
and press the central button.
For more information, refer to the instructions manual on the CD supplied with the product
DS1092-196
or it is possible to access to the next submenu,
SAVE&END
5