Maintenance; Maintenance Inspection - Pressalit R8711 Instrucciones De Uso Y Mantenimiento

Maintenance

Expected service life of the changing table is 9 years, provided that
maintenance is carried out as described below:
It is recommended on a weekly basis to run the motors on the product to their
maximum positions by raising the product to its full height, and then lowering
it to its lowest position, so that the internal parts are lubricated.
It is recommended that maintenance inspection is done once a year.

Maintenance inspection

Take the changing table to its highest position.
3
1
• Check the wall brackets
• Check all electrical connections to the control box
• Oil moving parts, especially the sliding brackets
• Check the sink drain
Reconnect mains.
Disconnect mains
before inspection.
2
and tighten if necessary.
①
for leaks (if a sink is fitted).
④
4
3
1
1
.
②
.
③
en
21