Initial Setup
When the TV is initially powered on, a sequence of on-screen prompts will assist in configuring basic settings. Press the
POWERP button. Setup is available only when the source is set to TV.
✎
If you connect any device to
Set-top box automatically. If you do not want to select Set-top box, please select Aerial.
If You Want to Reset This Feature...
Select System - Setup (Initial Setup). Enter your 4 digit PIN number. The default PIN number is "0-0-0-0". If you want to
change the PIN number, use the Change PIN function.
You should do Setup
✎
If you forget the PIN code, press the remote control buttons in the following sequence in Standby mode, which
resets the PIN to "0-0-0-0":
Changing the Input Source
Source
TV / Ext. / HDMI1 / HDMI2/DVI / AV / Component
Use to select TV or other external input sources such as DVD / Blu-ray players / cable box / STB satellite receiver
connected to the TV.
✎
Press the
SOURCE
✎
PC(D-Sub) input is not supported. If you want to connect PC to the TV, you can connect the HDMI to DVI cable
with the
HDMI IN 2(DVI)
✎
Ext. always stays activated.
✎
Press the
TOOLS
•
Edit Name
You can set an external input source name you want.
− When connecting a PC to the
Edit Name.
− When connecting a PC to the
mode under Edit Name.
− When connecting an AV devices to the
DVI Devices mode under Edit Name.
Information
•
You can see detailed information about the connected external device.
[PH4500-SH]BN68-05773L-X0L04.indb 8
HDMI IN 1(STB)
before starting the installation, Channel Source will be changed to
→ System) again at home even though you did in shop already.
(MENU
→ 8 → 2 → 4 →
MUTE
button. In the displayed Source list, connected inputs will be highlighted.
port on the TV.
button.
HDMI IN 2(DVI)
HDMI IN 2(DVI)
HDMI IN 2(DVI)
POWER
(on)
port with HDMI cable, you should set the TV to PC mode under
port with HDMI to DVI cable, you should set the TV to DVI PC
port with HDMI to DVI cable, you should set the TV to
English - 8
2014-01-29
10:42:33