Movement R4 Manual Del Propietário página 50

ERROR MESSAGE AND SOLUTION
Problem
A: Not connected to the power
supply
B: The security key is not inserted
correctly
The treadmill
C: Transformer war not installed
does not work
correctly or is defective.
D: Electrical circuito interrupted
A: The security key has fallen
The treadmill
stopped
suddenly
B: Electronic system problem
Key is defectivo
Key defect
Key does not work
E1 Loose or defective connection wire
A Loose or defective connection :
wire or defective controller.
E3
B: Speed sensor incorrectly
installed or defective
A Incline motor induction wire is not :
well connected
E4
B: Incline motor AC wire installed
incorreclty
Cause
21
How to solve the problem
Connect to the power supply or turn the
button to the ''ON'' position
Insert the security key in the correct
position
Install the transformer correctly or replace
it
Check the connecting wire and the
connecting wire terminal and connect
correctly.
Insert the security key correctly
Request technical assistance
Change the key
Change keyboard and wiring. Swap PCB
and computer
Connect correctly or change the wire
between the console and the controller.
Connect motor wiring correctly or
replace controller
Install the speed sensor correctly or replace
the speed sensor
Connect the induction wire correctly
The AC wire corresponds to the symbol
on the controller