Movement R4 Manual Del Propietário página 42

INSTRUCTIONS FOR USE
CONNECTING THE TREADMILL
Connect the power cord to a 20A outlet. Place the switch in the "ON / ON" position. The screen
will light up and sound.
SECURITY KEY AND CLAMP
The safety switch is designed to cut off the power supply to the conveyor in case you fall.
Therefore, the safety switch must immediately stop moving the belt. At high speed, it can be
uncomfortable and even dangerous to stop movement immediately. Therefore, use the security
key only as an emergency. To disconnect the treadmill completely safely and comfortably, use
the red (STOP) button.
The belt will only start if the safety key is properly inserted into the slot in the center of the
console. The other end should be firmly attached to your clothing, so that if you fall, the security
key will be pulled off the console, which will immediately turn off the belt, reducing the risk of
injury.
For your safety, never use the treadmill without attaching the safety key to your clothing. Pull the
tab on the safety key to ensure that it will not come loose from your clothing.
CLIMBING UP AND DOWN
Take care when getting on and off the treadmill. Try to use the support bars when going up and
down. While preparing to use the mat, do not step on the canvas. Place your feet on the side rails
of the mat. Only step on the tarp after it has started to move at a slow, steady speed.
During exercise, keep your body and head forward at all times. Never try to rotate the body on
the mat while the tarpaulin is moving. When you have finished exercising, turn off the treadmill by
pressing the red (STOP) button. Wait until the mat stops completely before trying to descend.
DANGER!
Never use the mat without first securing the safety key clip to your clothing.
CAUTION!
For your safety, step on the tarp when the speed is less than 3 k/m
13