Assembling And Disassembling; Maintenance Instructions - Desoutter SLC030-F1200-C4Q Manual Del Usuario

English
LUBRICATION
Do not apply too much grease on gears
or bearings; a thin coat shall be sufficient.
Apply a minimum quantity of grease for
easier identification of components when
assembling.
TOOLS
● No specific tools.

ASSEMBLING AND DISASSEMBLING

Follow standard engineering practices and
refer to figure for the mounting of component
subassemblies.

MAINTENANCE INSTRUCTIONS

Maintenance should be performed by qualified
personnel only.
● Prior to any maintenance task: disconnect the
tool.
● When disassembling / reassembling the tool,
take the following precautions:
- Check that the controller is switched off.
- Disconnect the cable.
When disposing of components,
lubricants, etc ... ensure that the
relevant safety procedures are carried
out.
According to Directive 2002/96/CE concerning
Waste Electrical and Electronic Equipment
(WEEE), this product must be recycled.
Please contact your "Customer Centre" or consult
the website "www.desouttertools.com" to find out
where you can recycle this product.
05/2020
DESOUTTER WARRANTY
1. This Desoutter product is warranted against
defective workmanship or materials, for a
maximum period of 12 months following the
date of purchase from Desoutter or its agents,
provided that its usage is limited to single shift
operation throughout that period. If the usage
rate exceeds that of single shift operation, the
warranty period shall be reduced on a prorata
basis.
2. If, during the warranty period, the product
appears to be defective in workmanship or
materials, it should be returned to Desoutter
or its agents, together with a short description
of the alleged defect. Desoutter shall, at its
sole discretion, arrange to repair or replace
free of charge such items as are deemed
faulty by reason of defective workmanship or
materials.
3. This warranty ceases to apply to products
which have been abused, misused or
modified, or which have been repaired using
other than genuine Desoutter spare parts
or by someone other than Desoutter or its
authorized service agents.
4. Should Desoutter incur any expense
correcting a defect resulting from abuse,
misuse, accidental damage or unauthorized
modification, they will require that such
expense shall be defrayed in full.
5. Desoutter accepts no claim for labour or other
expenditure made upon defective products.
6. Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7. This warranty is given in lieu of all other
warranties, or conditions, expressed or
implied, as to the quality, merchantability or
fitness for any particular purpose.
8. No one, whether an agent, servant or
employee of Desoutter, is authorized to add to
or modify the terms of this limited warranty in
any way.
7 / 52
6159934950_05