FITFIU FITNESS ROB-15 Manual Usuario página 30

STEP 5
Place the left side of the rear axle into the left mount of the
bike trainer, tighten the left knob and then tighten the locking
knob to ensure stability of the bike.
STEP 6
Tighten the pressure regulating knob so that it contacts the
tyre.
STEP 7
Install the resistance leveler on the handlebar, turn the knob
to adjust the pressure.
STEP 8
Place the front wheel of the bicycle on the front wheel lift
bracket to prevent the bicycle from accidentally swinging.
HOW TO REMOVE THE BIKE FROM THE ROLLER
1. Remove the resistance leveller from the handlebars
2. Unadjust the pressure regulator so that the roller does not touch the rear wheel.
3. Unscrew the lock/release knob.
NOTE: If you have replaced the rear wheel axle with the quick-release adapter that comes with
the product, this adapter is also valid for use on the road.
If you want to leave the bike installed on the roller, we recommend that you undo the resistance
adjustment knob so that the wheel is free. This will prevent flat spots on the wheel.
30