FITFIU FITNESS ROB-15 Manual Usuario página 29

ROB-15
ASSEMBLY
STEP 1
Unpack the product, fully unfold the legs and place it on a flat, horizontal surface. You can level the legs by adjusting
the height of the foot base pad to keep the bike roller stable.
STEP 2
Insert the top of the tyre pressure knob into the slot in the
upper buckle of the resistance device and turn it to the
lowest position.
STEP 3
If your bicycle axle is not compatible with the roller, remove the
rear axle from your bicycle wheel and install the supplied quick
release adapter.
NOTE: The quick release adapter is compatible with
5 x 130 mm QR and 5 x 135 mm QR axles.
STEP 4
Put your bike on the bicycle roller, turn the black handle to fix
the rear wheel and adjust the knob on the other side slightly.
EN
29