Hitachi RAK-70PPA Manual De Instrucciones página 25

WEEKLY TIMER OPERATION
Step 2: Select Mode A or Mode B and activate or deactivate WEEKLY TIMER.
NOTE
When setting ONCE TIMER, operation of WEEKLY TIMER is interrupted. After ONCE TIMER operation
●
is complete, WEEKLY TIMER operation will be activated.
When ONCE TIMER is cancelled, operation of WEEKLY TIMER is also cancelled. Need to set WEEKLY
●
TIMER operation for activation.
● After auto restart, WEEKLY TIMER operation is cancelled. Need to set WEEKLY TIMER operation for
activation.
■ How to select Mode A or Mode B of WEEKLY TIMER setting.
1
1. Press
2
(Normally Mode A will blink rst).
2. Press (WEEKLY) button again.
3. Select Mode A or Mode B. Press
the remote controller towards the indoor unit for about 3 seconds. Timer
lamp on the indoor unit will blink rapidly.
After beep sound emitted from indoor unit, TIMER lamp will light up.
3
Please ensure that the TIMER lamp lights up.
This indicates that Mode A or Mode B selection and active WEEKLY
TIMER have been con rmed.
■ Setting non-active WEEKLY TIMER .
1. Direct the remote controller towards the indoor unit and press
(CANCEL) button.
1
Beep sound will be emitted from indoor unit and TIMER lamp will be OFF.
Reservation indication on remote display will also disappear.
This indicates that non-active WEEKLY TIMER has been con rmed.
To activate back the setting of WEEKLY TIMER , repeat the steps for
●
"How to select Mode A or Mode B of WEEKLY TIMER setting".
– 21 –
(WEEKLY) button. and blink on the display.
and blink on the display.
(SEND) button while directing