Setting The Timer - Panasonic CS-ME7NKE Manual Técnico Y De Servicio

SETTING THE TIMER

NOTE
In the descriptions below, the following settings are used for the
temperature and time indicator selector button on the bottom front
section of the remote controller.
• Temperature: °C
• Time: AM, PM
1. How to set the present time
(Example) To set to 10:30 pm.
Operation
1.
Press the CLOCK button
once if the time indicator is
not flashing.
2.
Press the Advance, Return
( , ) button until PM 10:30
is displayed.
3.
Press the CLOCK button
again.
2. How to set the OFF time
(Example) To stop the air conditioner at 11:00 am.
Operation
1.
Press the OFF TIME setting
button once.
2.
Press the Advance, Return
( , ) button until AM
11:00 is displayed.
3.
Wait a few seconds, and
then the setting is complete.
14
All manuals and user guides at all-guides.com
Indication
The time indication alone
flashes.
The time can be set in 1-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
This completes the setting of
the current time.
Indication
The timer indication is
displayed, and the present OFF
time is shown.
The timer indication
blinks.
The time can be set in 10-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
The timer indication
stops blinking and the present
time is displayed.
3. How to set the ON time
(Example) To start operation at 7:10 am.
Operation
1.
Press the ON TIME setting
button once.
2.
Press the Advance, Return
( , ) button until AM 7:10
is displayed.
3.
Wait a few seconds, and
then the setting is complete.
4. How to set daily ON/OFF repeat timer
(Example) To start operation at 7:10 am. and stop the air
conditioner at 11:00 am.
10:30 pm.
7:10 am.
Present time
ON
Operation
1.
Set the timer ON/OFF times
as shown in 2-1, 2, 3 and 3-
1, 2, 3.
NOTE
• The ON/OFF combination timer uses the current time as the
reference, and it is activated starting from whichever set time
comes first.
• With the ON/OFF combination timer, the settings are repeated
every day.
• You can check the timer ON/OFF times after you have set them
by pressing the ON TIME and OFF TIME setting buttons.
To cancel a timer program
• Press the CANCEL button.
• When either an ON or OFF timer is to be canceled, press the
button corresponding to the timer whose program is to be
canceled, and then press the CANCEL button.
NOTE
• The airflow direction, fan speed and temperature setting can be
changed after a timer program has been set even when the unit
is stopped. Even when operation is stopped during an ON timer
program, the unit will start operating when the set time is
reached provided that the program is not canceled.
• When the ON timer and OFF timer are set to the same time, the
timer operates as if it is turned off.
Indication
The timer indication is
displayed, and the present ON
time is shown.
The timer indication
blinks.
The time can be set in 10-
minute increments. Holding
down the button advances the
time rapidly in 10-minute
increments.
The timer indication
stops blinking and the present
time is displayed.
11:00 am.
OFF
Indication
The present time 10:30 pm.
and are
displayed.