Idiomas disponibles
Idiomas disponibles
Locate the Long Wire-Mesh Right Side Panel.
2.
With the track on the Side Panel at the top and
facing the inside of the hutch, connect it to the
other side of the Front Panel by inserting the
pegs into the holes. Insert a Cotter Pin at each
connection point to secure the pegs in place.
Complete the run by connecting the final Short
3.
Wire-Mesh Back Panel to the two side panels.
Insert a Cotter Pin at each connection point to
secure the pegs in place.
Install the Elevated Living Area
Place the Solid Gabled Panel on the Long Wire-
4.
Mesh Right Side Panel, aligning the Gabled
Panel's track with the track of the Long Wire-
Mesh Panel. The pegs of the Gabled Panel will
fit into the holes of the Long Wire-Mesh Panel.
Insert a Cotter Pin at each connection point to
secure the pegs in place.
Place the Solid Back Panel on top of the Short
5.
Wire-Mesh Back Panel, attaching it to the Gabled
Panel by inserting the pegs of the Solid Panel into
the holes of the Gabled Panel. Insert Cotter Pins
at each connection point to secure the pegs in
place. NOTE: Th ere will be a te mporary
gap, as this Panel allows space for the
insertion and removal of the Floor Tray.
Track
Track
Track
3
