Assembly Instructions for Model Numbers 818, 824, 830, 836, 842, 848
IMPORTANT INFORMATION
Remove collar, tags, and leads from pet before placing it in the home to prevent possible entanglement.
Unwrap and remove all parts from the box. Keep the box and packing material until the product is assembled. In case
of return or exchange, failure to return product in similar condition as received could result in limited reimbursement.
Please save sales receipt as proof of purchase for warranty purposes. Check to ensure you have all the parts below. If
you discover any parts are missing, immediately call our toll-free service helpline at 1-800-428-8560 (Monday - Friday
Parts Include: Fold & Carry Pet Home, Plastic Pan, Divider Panel, and Plastic Carrying Handle(s)
ASSEMBLY INSTRUCTIONS
1.
Lay crate on flat surface so plastic pan is on bottom
and wires are facing up, then unlatch the locking
device located on side of crate.
2.
Grab any wire on the top panel and turn it like the
page of a book. Then grab the top and side panel
and pull upward. This will form the shape of the
crate.
3.
Make sure the bottoms of the two side panels rest
inside the bottom panel (as illustrated), and that one
edge of the top panel is "inside" the side panel and
"outside" of the other side panel.
NOTE: To view our crate assembly
video, scan the QR code or visit:
https://youtu.be/X7U2ghyA4R8
4.
Reach in the home and pull the door panel forward
until it fits into the clips on the ends of the side
panel. Repeat with the end panel.
822DD, 824DD, 830DD, 836DD, 842DD, 848DD
2
3
800-428-8560
midwesthomes4pets.com
P.O. Box 1031
Muncie, Indiana 47308
Locking
Device
Top Panel
Inside/Outside
Side
Panels
Inside/Inside
Bottom Panel
4