English (Original Instructions) - DeWalt DCF896 Traducido De Las Instrucciones Originales

18V TOOL CONNECT™ IMPACT WRENCH
DCF896, DCF896H
Congratulations!
You have chosen a D WALT tool. Years of experience, thorough
e
product development and innovation make D
most reliable partners for professional power tool users.
Technical Data
Voltage
Type
Battery type
No load speed
1st speed
2nd speed
3rd speed
Impact rate
Max. torque
Tool holder
Weight (without battery pack)
Noise values and vibration values (triax vector sum) according to EN62841-2-2:
L (emission sound pressure level)
PA
L (sound power level)
WA
K (uncertainty for the given sound
level)
Vibration emission value a =
h
Uncertainty K =
The vibration and/or noise emission level given in this
information sheet has been measured in accordance with
a standardised test given in EN62841 and may be used to
compare one tool with another. It may be used for a preliminary
assessment of exposure.

WARNING: The declared vibration and/or noise emission
level represents the main applications of the tool. However
if the tool is used for different applications, with different
accessories or poorly maintained, the vibration and/or
noise emission may differ. This may significantly increase
the exposure level over the total working period.
An estimation of the level of exposure to vibration and/
or noise should also take into account the times when the
tool is switched off or when it is running but not actually
doing the job. This may significantly reduce the exposure
level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration and/or noise such
as: maintain the tool and the accessories, keep the
hands warm (relevant for vibration), organisation of
work patterns.
WALT one of the
e
DCF896 DCF896H
V 18 18
DC
1 1
Li-Ion Li-Ion
min -1 0–900 0–900
0–2000 0–2000
0–2000 0–2000
min -1 0–3100 0–3100
Nm 447 447
1/2" 1/2"
(13 mm) (13 mm)
kg 1.6 1.6
dB(A) 94 94
dB(A) 105 105
dB(A) 3 3
m/s 13.5 13.5
2
m/s 4.4 4.4
2
EC-Declaration of Conformity
Machinery Directive and Radio Equipment
Directive
18V Tool Connect™ Impact Wrench
DCF896, DCF896H
D WALT declares that these products described under
e
Technical Data are in compliance with:
2006/42/EC, EN62841-1-2015, EN62841-2-2:2014.
These products also comply with Directive 2014/53/EU and
2011/65/EU. For more information, please contact D
the following address or refer to the back of the manual.
The undersigned is responsible for compilation of the technical
file and makes this declaration on behalf of D
Markus Rompel
Vice President of Engineering, PTE-Europe
D WALT, Richard-Klinger-Straße 11,
e
D-65510, Idstein, Germany 16.08.2019
WARNING: To reduce the risk of injury, read the
instruction manual.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to
these symbols.

DANGER: Indicates an imminently hazardous
situation which, if not avoided, will result in death or
serious injury.

WARNING: Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury.

CAUTION: Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury.
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage.

Denotes risk of electric shock.

Denotes risk of fire.
EnGLIsh
WALT at
e
WALT.
e
29