Safety Instructions; Safety Signal Words; Personal Precautions And Qualifications; Installation, Precautions - Chicago Pneumatic CP 0012 Instrucciones Originales

Safety and operating instructions

Safety instructions

To reduce the risk of serious injury or death to
yourself or others, read and understand the Safety
and operating instruction before installing,
operating, repairing, maintaining, or changing
accessories on the machine.
Post this Safety and operating instruction at work
locations, provide copies to employees, and make
sure that everyone reads the Safety and operating
instruction before operating or servicing the
machine.
In addition, the operator or the operator's employer
must assess the specific risks that may be present as
a result of each use of the machine.

Safety signal words

The safety signal words Danger, Warning and
Caution have the following meanings:
DANGER
WARNING
CAUTION
Personal precautions and
qualifications
Only qualified and trained persons may operate or
maintain the machine. They must be physically able
to handle the bulk, weight, and power of the tool.
Always use your common sense and good
judgement.
Personal protective equipment
Always use approved protective equipment.
Operators and all other persons in the working area
must wear protective equipment, including at a
minimum:
> Protective helmet
> Hearing protection
> Impact resistant eye protection with side
protection
> Respiratory protection when appropriate
> Protective gloves
> Proper protective boots
> Appropriate work overall or similar clothing (not
loose-fitting) that covers your arms and legs.
6
Indicates a hazardous situation
which, if not avoided, will result
in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could
result in death or serious injury.
Indicates a hazardous situation
which, if not avoided, could
result in minor or moderate
injury.
Drugs, alcohol or medication
WARNING Drugs, alcohol or medication
Drugs, alcohol or medication may impair your
judgment and powers of concentration. Poor
reactions and incorrect assessments can lead to
severe accidents or death.
Never use the machine when you are tired or
►
under the influence of drugs, alcohol or
medication.
No person who is under the influence of drugs,
►
alcohol or medication may operate the machine.

Installation, precautions

DANGER Whipping air hose
A compressed air hose that comes loose can lash
around and cause personal injury or death. To
reduce this risk:
Check that the compressed air hose and the
►
connections are not damaged, replace if
necessary.
Check that all compressed air connections are
►
properly attached.
Never carry a pneumatic machine by the air hose.
►
Never attempt to disconnect a compressed air
►
hose that is pressurized. First switch off the
compressed air at the compressor and then bleed
the machine by activating the start and stop
device.
Do not use quick disconnect couplings at tool
►
inlet. Use hardened steel (or material with
comparable shock resistance) threaded hose
fittings.
Whenever universal twist couplings (claw
►
couplings) are used, we recommend that lock
pins are installed and whipcheck safety cables are
used to safeguard against possible hose to tool
and hose to hose connection failure.
WARNING Ejected insertion tool
If the tool retainer on the machine is not in a locked
position, the inserted tool can be ejected with force,
which can cause personal injury.
Never start the machine while changing the
►
insertion tool.
► Before changing the insertion tool or accessories,
stop the machine, switch off the power supply
and bleed the machine by activating the start and
stop device.
Never point the inserted tool at yourself or anyone
►
else.
9800 0548 90b | Original instructions
CP 0012